Home Hardware › Flat › elizabeth 2 x 3 cottage

30-Pack round Matte Black Door Hinge 3.5 Inch 5/8 Inch Radius Interior 3 1/2 Inch Flat Iron Double Fold Residential Standard Bedroom Inner Door Controlled with 3 1/2 Inch X 3 1/2 Inch Hardware

Door Hinge Black Matte 3.5in (about 9.5cm) 5/8 Rounded Corners and 6 One Holes Suitable for Front Doors Cabinets Wooden Boxes. Safety Black Door Hinge 3.5in (about cm) Includes 180 One Free Screws for Easy Installation. Black Door Hinge Can Rotate 270... more

30-Pack round Matte Black Door Hinge 3.5 Inch 5/8 Inch Radius Interior 3 1/2 Inch Flat Iron Double Fold Residential Standard Bedroom Inner Door Controlled with 3 1/2 Inch X 3 1/2 Inch Hardware

Door Hinge Black Matte 3.5in (about 9.5cm) 5/8 Rounded Corners and 6 One Holes Suitable for Front Doors Cabinets Wooden Boxes. Safety Black Door Hinge 3.5in (about cm) Includes 180 One Free Screws for Easy Installation. Black Door Hinge Can Rotate 270... more

#6 x 1 1/2 Deep Thread Wood Screws / Square Drive / Flat Head / Type 17 Point Pt / Steel / Zinc / Type 17 Point Point / 2/3 Thread / #2 Square Drive (Quantity: 3 500 pcs)

Flat Square Recess (No Nibs) Deep Thread Wood Screws With Type-17 Point Case Hardened to Rockwell C45 min. Partially Threaded Steel Zinc & Bake more

#8 x 2 3/4 Deep Thread Wood Screws / Phillips / Flat Head / Steel / Zinc / Type 17 Point Pt / With Nibs / Type 17 Point Point / With Nibs / 2/3 Thread (Quantity: 2 000 pcs)

Wood Screws with #17 point Flat Phillips With Nibs End of thread section includes cutting edge and chip cavity Partially Threaded Carbon Steel Zinc Plated more

Weld On Steel Flat Tab Brackets 2 3/4 X 1 1/2 X 1/8 Thick - Weld On Tabs 3/8 Hole - Steel Weld Tab (12)

2 3/4 x 1 1/2 x 1/8 Weld On Steel Flat Tab Brackets with a 3/8 hole The brackets are used for many applications when a weld-on bracket is needed so a steel post or rail can be anchored to a wall column wood post etc Thickness of the material is 1/8... more

4 Pcs Stainless Steel 316 Grade 1-3/4 OD Flat Back D Glass Clamp 65 X 45 Mm (2.5 X 1.75 Inches) For 3/8 Or 1/2 Tempered Glass Or Laminated Glass (Flat Finish)

316 Stainless steel round glass clamp 4-pack The glass clamp size 65 x 45 x 25 mm (H x L x W) For 3/8 (10 mm) or 1/2 (12 mm) glass thickness Installing for flat square surface railing post (4) glass clamps (8) 10 mm gaskets (8) 12 mm gaskets (4) PINs... more

10 Pack 3/8-16 X 1-1/2 Inch Threads Solid Brass Knurled Thumb Screws Knobs With Straight Shoulders Right-Hand Threads SAE Flat Tip Uncoated (3/8-16 X 1-1/2 Inch Long Threads)

10 pack/pieces knurled head solid brass thumb s with straight shoulders and flat tips The knurled surface on these thumb s provides optimal gripping allowing the to be tightened and loosened by hand pressure alone eliminating the need for tools.... more

Weld On Steel Flat Tab Brackets 2 3/4 X 1 1/2 X 1/8 Thick - Weld On Tabs 3/8 Hole - Steel Weld Tab (25)

2 3/4 x 1 1/2 x 1/8 Weld On Steel Flat Tab Brackets with a 3/8 hole The brackets are used for many applications when a weld-on bracket is needed so a steel post or rail can be anchored to a wall column wood post etc Thickness of the material is 1/8... more

On Steel Flat Tab Brackets 2 3/4 X 1 1/2 X 1/8 Thick - On Tabs 3/8 Hole - Steel Tab (25)

Thank you for your custom.Customer care is our top priority. Offer is subject to availability.We promise you won t regret buying it. 2 3/4 x 1 1/2 x 1/8 Weld On Steel Flat Tab Brackets with a 3/8 hole The brackets are used for many applications when a... more

On Steel Flat Tab Brackets 2 3/4 X 1 1/2 X 1/8 Thick - On Tabs 3/8 Hole - Steel Tab (25)

2 3/4 x 1 1/2 x 1/8 Weld On Steel Flat Tab Brackets with a 3/8 hole The brackets are used for many applications when a weld-on bracket is needed so a steel post or rail can be anchored to a wall column wood post etc Thickness of the material is 1/8... more

1/4 x 2-3/4 Concrete Screws | Phillips Flat Head| Blue Ceramic Coating Hi-Low Notched Threads Diamond Point | Thread-Diameter: 1/4 x Length: 2 3/4 (Carton Size: 100 pcs)

Flat Phillips Concrete Screws Double lead thread & diamond-shaped nail point Case Hardness: Rockwell C 50 min. (Core: Rockwell C 32-39) AISI 1022 or equivalent Steel Blue Ruspert Finish more

Weld On Steel Flat Tab Brackets 2 3/4 X 1 1/2 X 1/8 Thick - Weld On Tabs 3/8 Hole - Steel Weld Tab (25)

2 3/4 x 1 1/2 x 1/8 Weld On Steel Flat Tab Brackets with a 3/8 hole The brackets are used for many applications when a weld-on bracket is needed so a steel post or rail can be anchored to a wall column wood post etc Thickness of the material is 1/8... more

Weld On Steel Flat Tab Brackets 2 3/4 X 1 1/2 X 1/8 Thick - Weld On Tabs 3/8 Hole - Steel Weld Tab (12)

2 3/4 x 1 1/2 x 1/8 Weld On Steel Flat Tab Brackets with a 3/8 hole The brackets are used for many applications when a weld-on bracket is needed so a steel post or rail can be anchored to a wall column wood post etc Thickness of the material is 1/8... more

Weld On Steel Flat Tab Brackets 2 3/4 X 1 1/2 X 1/8 Thick - Weld On Tabs 3/8 Hole - Steel Weld Tab (12)

2 3/4 x 1 1/2 x 1/8 Weld On Steel Flat Tab Brackets with a 3/8 hole The brackets are used for many applications when a weld-on bracket is needed so a steel post or rail can be anchored to a wall column wood post etc Thickness of the material is 1/8... more

1-3/8 x 1-1/2 x 3-1/4 Zinc Plated Grade 2 Steel USS Flat Washers (30 pcs)

Diameter: 1-1/2 Diameter 2: 3-1/4 Thickness: 3/16 Material: Steel Finish: Zinc Thread Type: USS Hardness: Grade 2 Nominal Size: 1-1/8 Type: Flat Washer Box of 30. A flat washer is a thin usually round plate with a hole in the middle that is normally... more

Weld On Steel Flat Tab Brackets 2 3/4 X 1 1/2 X 1/8 Thick - Weld On Tabs 3/8 Hole - Steel Weld Tab (25)

2 3/4 x 1 1/2 x 1/8 Weld On Steel Flat Tab Brackets with a 3/8 hole The brackets are used for many applications when a weld-on bracket is needed so a steel post or rail can be anchored to a wall column wood post etc Thickness of the material is 1/8... more

1-1/2 x 1-5/8 x 3-1/2 Zinc Plated Grade 2 Steel USS Flat Washers FLWSRS-286

Diameter: 1-5/8 Diameter 2: 3-1/2 Thickness: 3/16 Material: Steel Finish: Zinc Thread Type: USS Hardness: Grade 2 Nominal Size: 1-1/2 Type: Flat Washer A flat washer is a thin usually round plate with a hole in the middle that is normally used to... more

1-1/2 x 1-5/8 x 3-1/2 Zinc Plated Grade 2 Steel USS Flat Washers FLWSRS-286

Diameter: 1-5/8 Diameter 2: 3-1/2 Thickness: 3/16 Material: Steel Finish: Zinc Thread Type: USS Hardness: Grade 2 Nominal Size: 1-1/2 Type: Flat Washer A flat washer is a thin usually round plate with a hole in the middle that is normally used to... more

1-1/2 x 1-5/8 x 3-1/2 Plain Grade 2 USS Flat Washers FLWSRS-283 (13 pcs.)

Diameter: 1-5/8 Diameter 2: 3-1/2 Thickness: 3/16 Material: Steel Finish: Plain Thread Type: USS Hardness: Grade 2 Nominal Size: 1-1/2 Type: Flat Washer Box of 13. A flat washer is a thin usually round plate with a hole in the middle that is normally... more

#8 x 2 1/2 Deep Thread Wood Screws / Square / Flat Head / Steel / Zinc / No Nibs / 2/3 Thread (Quantity: 2 200 pcs)

Flat Square Recess Deep Thread Wood Screws Case Hardened to Rockwell C45 min. Partially Threaded Steel Zinc Plated more

#8 x 2 1/2 Deep Thread Wood Screws / Square / Flat Head / Steel / Black Oxide / Type 17 Point Pt / With Nibs / Type 17 Point Point / With Nibs / 2/3 Thread (Quantity: 2 200 pcs)

Flat Square Recess with Nibs Deep Thread Wood Screws With Type-17 Point Case Hardened to Rockwell C45 min. Partially Threaded Steel Black Oxide more

#8 x 2 1/2 Deep Thread Wood Screws / Phillips / Flat Head / Steel / Black Oxide / No Nibs / 2/3 Thread (Quantity: 2 200 pcs)

Flat Phillips Deep Thread Wood Screws Case Hardened to Rockwell C45 min. Partially Threaded Steel Black Oxide more

#8 x 2 1/2 Deep Thread Wood Screws / Phillips / Flat Head / Steel / Zinc/ No Nibs / 2/3 Thread (Quantity: 2 200 pcs)

Flat Phillips Deep Thread Wood Screws Case Hardened to Rockwell C45 min. Partially Threaded Steel Zinc Plated more

#9 x 2 1/2 Exterior Wood Screws / Six-Lobe (Torx) / Flat Head / Steel / Zinc Yellow / Type 17 Point Pt / Type 17 Point Point / With Nibs / 2/3 Thread (Quantity: 2 200 pcs)

Flat Six-Lobe with Nibs Exterior Screws with Type-17 Point Coarse Thread / Partially Threaded End of thread section includes cutting edge and chip cavity Case Hardened to Rockwell C45 min. more

#8 x 2 1/2 Deep Thread Wood Screws / Square / Flat Head / Steel / Zinc / Type 17 Point Pt / With Nibs / Type 17 Point Point / With Nibs / 2/3 Thread (Quantity: 2 200 pcs)

Flat Square Recess with Nibs Deep Thread Wood Screws With Type-17 Point Case Hardened to Rockwell C45 min. Partially Threaded Steel Zinc Plated more

#7 x 2 1/2 Deep Thread Wood Screws / Phillips / Flat Head / Steel / Zinc / Type 17 Point Pt / With Nibs / Type 17 Point Point / With Nibs / 2/3 Thread (Quantity: 2 500 pcs)

Wood Screws with #17 point Flat Phillips With Nibs End of thread section includes cutting edge and chip cavity Partially Threaded Carbon Steel Zinc Plated more

#10 x 2 1/2 Deep Thread Wood Screws / Phillips / Flat Head / Steel / Zinc / Type 17 Point Pt / With Nibs / Type 17 Point Point / With Nibs / 2/3 Thread (Quantity: 2 000 pcs)

Wood Screws with #17 point Flat Phillips With Nibs End of thread section includes cutting edge and chip cavity Partially Threaded Carbon Steel Zinc Plated more

#9 x 2 1/2 Deep Thread Wood Screws / Square / Flat Head (#8 Head) / Type 17 Point Pt / Steel / Zinc / With Nibs / #8 Head / Type 17 Point Point / With Nibs / 2/3 Thread (Quantity: 2 500 pcs)

#8 Flat Square Recess with Nibs Deep Thread Wood Screws With Type-17 Point Case Hardened to Rockwell C45 min. Fully Threaded Steel Zinc & Bake more

3/8 -16 x 2 1/2 Coarse Thread Grade 5 Plow Bolt #3 Flat Head Medium Carbon Steel Zinc Plated Pk 250

PRODUCT SPECIFICATIONS Part #: 0000-118140 Fastener Type: Plow Bolt #3 Flat Head Size Description: 3/8 -16 x 2 1/2 Diameter/Nominal Size: 3/8 Length: 2 1/2 Thread Pitch: 16 Thread Pitch Type: Coarse Thread Direction: Right Thread Coverage: Full System... more

#10 x 3 1/2 Deep Thread Wood Screws / Phillips / Flat Head / Steel / Zinc / Type 17 Point Pt / With Nibs / Type 17 Point Point / With Nibs / 2/3 Thread (Quantity: 500 pcs)

Wood Screws with #17 point Flat Phillips With Nibs End of thread section includes cutting edge and chip cavity Partially Threaded Carbon Steel Zinc Plated more

#10 x 3 1/2 Exterior Wood Screws / Six-Lobe (Torx) / Flat Head / Steel / Zinc Yellow / Type 17 Point Pt / Type 17 Point Point / With Nibs / 2/3 Thread (Quantity: 800 pcs)

Flat Six-Lobe with Nibs Exterior Screws with Type-17 Point Coarse Thread / Partially Threaded End of thread section includes cutting edge and chip cavity Case Hardened to Rockwell C45 min. more

#8 x 3 1/2 Deep Thread Wood Screws / Combo / Flat Head / Type 17 Point Pt / Steel / Zinc / With Nibs / Square & Phillips Combo Drive / Type 17 Point Pt / With Nibs / 2/3 Thread (Quantity: 1 000 pcs)

Flat Square-Phillips with Nibs Deep Thread Wood Screws With Type-17 Point Case Hardened to Rockwell C45 min. Partially Threaded Steel Zinc more

#8 x 2 Deep Thread Wood Screws / Square / Flat Head / Steel / Zinc / Type 17 Point Pt / With Nibs / Type 17 Point Point / With Nibs / 2/3 Thread (Quantity: 3 500 pcs)

Flat Square Recess with Nibs Deep Thread Wood Screws With Type-17 Point Case Hardened to Rockwell C45 min. Partially Threaded Steel Zinc Plated more

#8 x 3 1/2 Deep Thread Wood Screws / Square / Flat Head / Steel / Black Oxide / No Nibs / No Nibs / 2/3 Thread (Quantity: 1 300 pcs)

Flat Square Recess Deep Thread Wood Screws Case Hardened to Rockwell C45 min. Partially Threaded Steel Black Oxide more

#8 x 3 1/2 Deep Thread Wood Screws / Square / Flat Head / Type 17 Point Pt / Steel / Zinc / With Nibs / Type 17 Point Point / With Nibs / 2/3 Thread (Quantity: 1 500 pcs)

Flat Square Recess with Nibs Deep Thread Wood Screws With Type-17 Point Case Hardened to Rockwell C45 min. Partially Threaded Steel Zinc Plated more

3/4 -10 x 2 3/4 Slotted Head Cap Screws / Flat Countersunk / Grade 2 / Slotted Drive / Steel / Plain Finish (Quantity: 25 pcs)

Slotted Head Cap Screws featuring a Slotted Drive Thread Diameter - Pitch: 3/4-10 Length: 2 3/4 more

#9 x 2 Deep Thread Wood Screws / Phillips / Flat Head / Steel / Zinc / Type 17 Point Pt / With Nibs / Type 17 Point Point / With Nibs / 2/3 Thread (Quantity: 3 000 pcs)

Wood Screws with #17 point Flat Phillips With Nibs End of thread section includes cutting edge and chip cavity Partially Threaded Carbon Steel Zinc Plated more

8-11 x 3 1/2 Deep Thread Wood Screws | Flat Square-Phillips with Nibs | Type 17 Pt | 2/3 Thread Partially Threaded | Steel | Zinc (Quantity: 1000)

8-11 x 3 1/2 Deep Thread Wood Screws | Flat Square-Phillips with Nibs | Type 17 Pt | 2/3 Thread Partially Threaded | Steel | Zinc (Quantity: 1000) more