Home Hardware › Machine Screws › white 60 x 0 37

Antunes 308P227 No.8-32 x 0.37 in. Machine Screw

A screw is a type of fastener in some ways similar to a bolt typically made of metal and characterized by a helical ridge known as a male thread (external thread). A screw drive is a system used to turn a screw. At a minimum it is a set of shaped... more

ZORO SELECT MPPD040600-025P1 M4-0.70 x 60 mm Phillips Pan Machine Screw, Zinc

Machine Screw, Head Type Pan, Material Steel, Finish Zinc Plated, Drive Phillips, Thread Size M4, Fastener Length 60 mm, Head Width 8 mm, Head Height 3.25 mm, Drive Size #2, Tensile Strength 60,900 psi, Dimensional Standards DIN 7985A, DIN EN ISO 7045,... more

ZORO SELECT M24660.050.0030 M5-0.80 x 30 mm Phillips Fillister Machine Screw,

Machine Screw, Head Type Cheese, Material Steel, Finish Zinc Plated, Drive Phillips, Thread Size M5, Fastener Length 30 mm, Head Width 10 mm, Head Height 3.95 mm, Drive Size #2, Tensile Strength 60,900 psi, Dimensional Standards DIN 7985H, DIN EN ISO... more

ZORO SELECT M24660.040.0040 M4-0.70 x 40 mm Phillips Fillister Machine Screw,

Machine Screw, Head Type Cheese, Material Steel, Finish Zinc Plated, Drive Phillips, Thread Size M4, Fastener Length 40 mm, Head Width 8 mm, Head Height 3.25 mm, Drive Size #2, Tensile Strength 60,900 psi, Dimensional Standards DIN 7985H, DIN EN ISO... more

Traulsen SA-021-37 10-32 x 0.31 in. Machine Screw

A screw is a type of fastener in some ways similar to a bolt typically made of metal and characterized by a helical ridge known as a male thread (external thread). Screws are used to fasten materials by digging in and wedging into a material when... more

Antunes 308P183 8-32 x 0.37 in. Machine Screw Pack

A screw is a type of fastener in some ways similar to a bolt typically made of metal and characterized by a helical ridge known as a male thread (external thread). A screw drive is a system used to turn a screw. At a minimum it is a set of shaped... more

Hobart SC-127-26 6-32 x 0.37 in. Machine Screw

A screw is a type of fastener in some ways similar to a bolt typically made of metal and characterized by a helical ridge known as a male thread (external thread). A screw drive is a system used to turn a screw. At a minimum it is a set of shaped... more

M3.5-0.60 x 35mm Machine Screws / Phillips / Pan Head / 18-8 Stainless Steel (Quantity: 500 pcs)

Thread Diameter-Pitch: M3.5-0.60 Length: 35mm Head Type: Pan Head. Pan heads are slightly rounded with short vertical sides. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be... more

M3.5-0.60 x 25mm Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel (Quantity: 1000 pcs)

Thread Diameter-Pitch: M3.5-0.60 Length: 25mm Head Type: Flat Head 90 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

M5-0.8 x 60 mm Machine Screws / Phillips / Flat Head / Steel / Zinc / DIN965 - 1000 Piece Carton

Fastener SuperStore Offers Bulk Machine Screws - M5-0.8 x 60 mm / Phillips Drive / Flat Head / Steel / Zinc / DIN965 in 1000 Pc. Cartons more

M3.5-0.60 x 20mm Machine Screws / Phillips / Pan Head / 18-8 Stainless Steel (Quantity: 5000 pcs)

Thread Diameter-Pitch: M3.5-0.60 Length: 20mm Head Type: Pan Head. Pan heads are slightly rounded with short vertical sides. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be... more

Machine Screw - Phillips Drive Pan Head - 316 Stainless Steel - M5 x 0.8mm Thread - 60 mm Long - Pack of 10

Used to fasten and join two components. Screws dig and wedge into a material and the thread cuts grooves in the fastened material pulling fastened materials together and preventing pull-out. Pan head features a disc with chamfered outer edge and short... more

M3.5-0.60 x 35mm Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel (Quantity: 4000 pcs)

Thread Diameter-Pitch: M3.5-0.60 Length: 35mm Head Type: Flat Head 90 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

M3.5-0.60 x 12mm Machine Screws / Slotted / Flat Head / 18-8 Stainless Steel (Quantity: 10000 pcs)

Thread Diameter-Pitch: M3.5-0.60 Length: 12mm Head Type: Flat Head 90 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

M3.5-0.60 x 25mm Machine Screws / Phillips / Pan Head / 18-8 Stainless Steel (Quantity: 1000 pcs)

Thread Diameter-Pitch: M3.5-0.60 Length: 25mm Head Type: Pan Head. Pan heads are slightly rounded with short vertical sides. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be... more

M4-0.7 x 60 mm Machine Screws / Phillips / Pan Head / 18-8 Stainless Steel / DIN7985A - 1000 Piece Carton

Fastener SuperStore Offers Bulk Machine Screws - M4-0.7 x 60 mm / Phillips Drive / Pan Head / 18-8 Stainless Steel / DIN7985A in 1000 Pc. Cartons more

M3.5-0.60 x 12mm Machine Screws / Phillips / Pan Head / 18-8 Stainless Steel (Quantity: 7000 pcs)

Thread Diameter-Pitch: M3.5-0.60 Length: 12mm Head Type: Pan Head. Pan heads are slightly rounded with short vertical sides. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be... more

M3.5-0.60 x 10mm Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel (Quantity: 10000 pcs)

Thread Diameter-Pitch: M3.5-0.60 Length: 10mm Head Type: Flat Head 90 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

M6-1.0 x 60 mm Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel / DIN965 (Quantity: 250 pcs)

DIN 965 Flat Phillips Machine Screw Fully Threaded 18-8 Stainless Steel more

M5-0.8 x 60 mm Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel / DIN965 - 500 Piece Carton

Fastener SuperStore Offers Bulk Machine Screws - M5-0.8 x 60 mm / Phillips Drive / Flat Head / 18-8 Stainless Steel / DIN965 in 500 Pc. Cartons more

M3.5-0.60 x 14mm Machine Screws / Slotted / Flat Head / 18-8 Stainless Steel (Quantity: 1000 pcs)

Thread Diameter-Pitch: M3.5-0.60 Length: 14mm Head Type: Flat Head 90 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

M3.5-0.60 x 28mm Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel (Quantity: 1000 pcs)

Thread Diameter-Pitch: M3.5-0.60 Length: 28mm Head Type: Flat Head 90 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

M4-0.7 x 60 mm Machine Screws / Phillips / Pan Head / 18-8 Stainless Steel / DIN7985A (Quantity: 1 000 pcs)

DIN 7985a Flat Phillips Machine Screw Type H Fully Threaded 18-8 Stainless Steel more

M6-1.0 x 60 mm Machine Screws / Phillips / Flat Head / Steel / Zinc / DIN965 (Quantity: 500 pcs)

DIN 965 Flat Phillips (Type H) Machine Screw Class 4.8 Steel Coarse / Fully Threaded Zinc Plated more

M3.5-0.60 x 12mm Machine Screws / Slotted / Flat Head / 18-8 Stainless Steel (Quantity: 1000 pcs)

Thread Diameter-Pitch: M3.5-0.60 Length: 12mm Head Type: Flat Head 90 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

M6-1.0 x 60 mm Machine Screws / Phillips / Flat Head / Steel / Zinc / DIN965 - 500 Piece Carton

Fastener SuperStore Offers Bulk Machine Screws - M6-1.0 x 60 mm / Phillips Drive / Flat Head / Steel / Zinc / DIN965 in 500 Pc. Cartons more

M3.5-0.60 x 10mm Machine Screws / Phillips / Pan Head / 18-8 Stainless Steel (Quantity: 8000 pcs)

Thread Diameter-Pitch: M3.5-0.60 Length: 10mm Head Type: Pan Head. Pan heads are slightly rounded with short vertical sides. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be... more

M3.5-0.60 x 16mm Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel (Quantity: 1000 pcs)

Thread Diameter-Pitch: M3.5-0.60 Length: 16mm Head Type: Flat Head 90 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

M3.5-0.60 x 30mm Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel (Quantity: 1000 pcs)

Thread Diameter-Pitch: M3.5-0.60 Length: 30mm Head Type: Flat Head 90 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

M3.5-0.60 x 10mm Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel (Quantity: 1000 pcs)

Thread Diameter-Pitch: M3.5-0.60 Length: 10mm Head Type: Flat Head 90 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

M3.5-0.60 x 20mm Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel (Quantity: 6000 pcs)

Thread Diameter-Pitch: M3.5-0.60 Length: 20mm Head Type: Flat Head 90 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

M3.5-0.60 x 18mm Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel (Quantity: 7000 pcs)

Thread Diameter-Pitch: M3.5-0.60 Length: 18mm Head Type: Flat Head 90 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

M3.5-0.60 x 16mm Machine Screws / Slotted / Flat Head / 18-8 Stainless Steel (Quantity: 1000 pcs)

Thread Diameter-Pitch: M3.5-0.60 Length: 16mm Head Type: Flat Head 90 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

M3.5-0.60 x 18mm Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel (Quantity: 1000 pcs)

Thread Diameter-Pitch: M3.5-0.60 Length: 18mm Head Type: Flat Head 90 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

M3.5-0.60 x 20mm Machine Screws / Phillips / Pan Head / 18-8 Stainless Steel (Quantity: 1000 pcs)

Thread Diameter-Pitch: M3.5-0.60 Length: 20mm Head Type: Pan Head. Pan heads are slightly rounded with short vertical sides. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be... more

M3.5-0.60 x 22mm Machine Screws / Slotted / Flat Head / 18-8 Stainless Steel (Quantity: 1000 pcs)

Thread Diameter-Pitch: M3.5-0.60 Length: 22mm Head Type: Flat Head 90 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

M3.5-0.60 x 20mm Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel (Quantity: 1000 pcs)

Thread Diameter-Pitch: M3.5-0.60 Length: 20mm Head Type: Flat Head 90 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

Machine Screw - Phillips Drive Pan Head - 18-8 Stainless Steel - M4 x 0.7 mm Thread - 60 mm Long - Pack of 25

Used to fasten and join two components. Screws dig and wedge into a material and the thread cuts grooves in the fastened material pulling fastened materials together and preventing pull-out. Pan head features a disc with chamfered outer edge and short... more