You're in Home Hardware
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
Best Seller | Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is a tension spring roller... ... more | go to store |
This is a drive-in style patio door roller assembly used on Pella wood patio doors. It is 11/16 in. wide x 1-11/16 in. deep and 2-3/4 in. long. It is driven into a rectangular mortise in the bottom of the door. When installing, the adjustment screw... ... more | go to store |
This sliding screen door roller assembly fits onto the spring-loaded arm of a Columbia corner insert. The roller housing is stamped steel with a 1 in. steel ball bearing roller installed. These rollers are a replacement roller for the discontinued... ... more | go to store |
This is an diecast plain back patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The dimensions are 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a 10-32... ... more | go to store |
This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
This is a unique back patio door roller assembly with a 1-1/4 in. concave Plastic ball bearing roller. The stamped steel housing is 11/16 in. wide and 1-3/8 in. tall. It is rear adjusting with a set of tabs or ears that insert into slots in the door's... ... more | go to store |
This is a 7/8 inch tub and shower door nylon ball bearing roller with an oval-edged wheel. It has a threaded hex head hub that uses an 8-32 x 3/8 inch long Phillips binder head machine screw to fasten it to the door bracket. Used on many different tub... ... more | go to store |
This is a unique housing patio door roller assembly. It is 3/4 in. wide and 2-1/8 in. long with a 1-1/4 in. diameter steel ball bearing roller attached. To install, remove the screw from the back and insert the assembly into the bottom rail end.... ... more | go to store |
This sliding screen door roller is as common roller replacement for many sliding screen doors. It is a high density polyethylene ball bearing roller with a center groove. It is 1 inch in diameter and 1/4 inch thick with a 3/16 inch axle hole. Order... ... more | go to store |
This is a U-back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller in a stamped steel U-back style housing. When installed the U-back housing is drawn tightly into position against the side stile as the mounting... ... more | go to store |
This sliding patio door roller assembly is constructed from steel. It features a 1 In. ball bearing wheel with an adjustable steel housing. This type of roller assembly is quick and easy to install. | Prime-Line Single 1-1/8 in. Steel Ball Bearing... ... more | go to store |
This is a U-tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller in a stamped steel "U" back style housing. When installed the U-back housing is drawn tightly into position against the side stile as the mounting screw or... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The housing is 3/4 in. wide with a 7/8 in. flare and 1-1/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end. It is... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide, 1-1/4 in. tall and 2-3/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting... ... more | go to store |
This is a C-tab patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. As the C-tab is positioned around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It is 3/4 in. wide with a 27/32 in. flare, 1-5/8 in. tall and 1-1/2 in. long (not including the inner roller housing). It is rear adjusting... ... more | go to store |
This is an F-tab patio door roller assembly with a 1-1/4 in. concave ball bearing roller that replaces the Old Style design. Used on Sun Valley, Fullview, Glasco and a variety of other sliding patio door manufacturers. When the corner screw passes... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 11/16 in. wide and 1-1/2 in. tall with a flare width of 13/16 in. It is a rear adjusting with a 1/4-20 threaded... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end and an optional use #10-32 threaded hole on top. Used by Fleetwood and a... ... more | go to store |
This is a sliding window in a black plastic housing with a flat-edged stainless steel ball-bearing roller. Features a stainless steel roller insert carrier. | Prime-Line Sliding Window Roller, 9/16 in. Stainless Steel, Ball Bearing Roller in Black |... ... more | go to store |
This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
This is an unique back diecast patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller used on Crossly doors. It's unique diecast housing is 11/16 in. stepping down to 9/16 in. wide, 1-1/8 in. tall and 2-5/16 in. long with a flare... ... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This sliding screen door roller... ... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This spring-loaded style sliding... ... more | go to store |
This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. Its plain back diecast is 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 9/16 in. wide with a 13/16 in. flare and 1-3/16 in. tall. It is rear adjusting with a threaded mounting... ... more | go to store |
This is a E-tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller. As the corner screw passes through the E-tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 19/32 in. wide with... ... more | go to store |
This is a E-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. As the corner screw passes through the E-tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 19/32 in. wide with... ... more | go to store |
This is an E-tab tandem roller assembly with two 1-1/2 in. concave steel ball-bearing rollers. As the corner screw passes through the E- tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 11/16 in. wide with... ... more | go to store |
This is a C-tab patio door roller assembly with a 1-1/4 in. diameter concave, or grooved, steel ball bearing roller. As the C-shaped tab fits around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides... ... more | go to store |
This is a unique back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has the unique housing that is 15/16 in. wide and 1-5/16 in. tall. It is rear adjusting with a 10-24 threaded mounting hole and mounting... ... more | go to store |
This is a plain back tandem roller assembly with a 1/4-20 threaded mounting hole and two narrow mounting slots on the back end. These slots slide onto an opposite shaped extrusion on the door frame. The adjustable stamped steel housing is 11/16 in.... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 11/16 in. wide and 1-1/2 in. tall with a flare width of 13/16 in. and features a rear adjusting with a 1/4-20... ... more | go to store |
This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-3/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 7/8 in. flare and 1-3/16 in. tall. It is rear adjusting with a threaded mounting hole on the... ... more | go to store |
This is an F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... ... more | go to store |
Ads related to Prime-Line 1-1/4 in. Steel Ball Bearing Rollers, Precision in Brown | 7.4 H x 3.75 W x 0.6 D in | Wayfair D 1765